Truck fit
Jeep Gladiator Roll-Up Tonneau Covers
Two titles for the Gladiator. Rough Country's soft cover names 2020-2025 at 5 ft (60.3 in). BAK's hard Revolver X4s names 2020-2027 and no bed. Neither comes with a sheet for this truck that we could read, so neither is our pick.
Disclosure: This page contains affiliate links (marked with *). If you buy through them, we earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
The short version
For a 2020-2025 Gladiator, start with the Rough Country soft cover titled 5 ft (60.3 in). For a 2026 or a hard lid, BAK's Revolver X4s title runs 2020-2027 and names no bed. Both are listing data only for this truck. Ask the seller to confirm your bed and any bed accessories before you buy.
| Cover | Stated fit | Source | Listing |
|---|---|---|---|
| Rough Country soft (2020-2025 Gladiator, 5 ft) Soft roll-up | Jeep Gladiator (2020-2025) - Fits 5' (60.3") Bed | Listing title only November 3, 2026 | On Amazon* |
| BAK Revolver X4s (2020-2027 Gladiator) Hard rolling | 2020-2027 Jeep Gladiator (no bed length in the title) | Listing title only November 3, 2026 | On Amazon* |
Wording as the listing states it. Check your exact year and bed length on the listing before you buy. * Paid link.
Rough Country soft (2020-2025 Gladiator, 5 ft)
Soft roll-up cover whose listing title reads: Jeep Gladiator (2020-2025) - Fits 5' (60.3") Bed.
Fits, according to the listing
Jeep Gladiator (2020-2025) - Fits 5' (60.3") Bed (read November 3, 2026)
Check your exact year and bed length on the listing before you buy.
Why here: Title names years and a 5 ft bed with inches. We read Rough Country's hard manual, not one for this soft cover. Buy it if your year is in the title. Skip it if you own a 2026.
We could read only the Amazon listing title for this cover, no maker sheet. It is an option here, not our pick.
Why buy it
- Title names the truck, the years and a bed length
Why skip it
- Rough Country's product pages blocked our reader, so no maker sheet was read for this soft cover
- Style
- Soft roll-up
- Material
- Not read from a maker sheet
- Install
- Not read from a maker sheet
- Price class
- Mid-range
Soft or hard on this truck
Soft is your likely choice unless the lid matters to you. The Rough Country soft title names a bed in inches, and BAK's does not. On a truck with fewer listings, that is a real advantage.
Hard makes sense if you want slats. RealTruck lists a drill-free install and a 5-year warranty on the X4s. Have the seller confirm your bed, and give your measured inches. See soft vs hard for how the two compare in general.
What Gladiator owners run into
Some owners add rails, racks and off-road gear. No title we read mentions any of them. Ask about these before you order:
- A bed rack. Racks and covers can both want the rail space. Ask whether your rack's feet and the clamps can both fit.
- A tie-down system. Any rail system in the bed may need a different clamp, as it does on Tacoma deck rails.
- A bed liner. Tyger's sheets call for small 2 x 4 in holes if a liner runs over the rail. It is a different maker's sheet, but it is the same kind of problem. See bed liners.
- Off-road dust and mud. Clean with mild soap and water. See how to clean a vinyl cover for what makers say to keep off it.
The years, as stated
Rough Country says 2020-2025. BAK says 2020-2027. If you bought a 2026, go by the listing that names your year. Do not stretch a title to fit. We wrote a page on what a cover listed through 2026 means for a 2027 that applies here too.
Bed length
Rough Country's 60.3 inches is the only number we have. We read no Jeep document on this truck's bed, so we have no maker figure to set beside it. A tape measure settles it. Follow our guide and write to the seller with your number if it looks off.
What is not here
A pick. A pick needs a title that names the bed and a maker document that goes with the product. Each of these has one half of that. Rough Country's title has the bed, but the manual we read is for its hard cover. BAK has RealTruck's description, but no bed in the title. For more on each maker, see Rough Country and BAK. And the full method is in how we verify fitment.
What owners ask
Does the Rough Country title cover a 2026 Gladiator?
Its title stops at 2025. BAK's runs to 2027. If you own a 2026, Rough Country's title does not name you, so ask the seller or look at BAK.
Do bed accessories change the fit?
Neither title addresses them. If you run a bed rack, a tie-down system or any other rail accessory, ask the seller first. A rack may want the same rail space as a cover's clamps.
Do you have a weight figure for the BAK on a Gladiator?
RealTruck lists a load for the Revolver X4s in general, on our weight page. It does not say it applies differently by truck, and nothing we read addresses the Gladiator in particular.
Sources
Where to next
- Truck fitAll trucksPick your truck, then your years and bed. Every roll-up tonneau cover listed here quotes the fit wording from its listing or the maker's own sheet.
- BrandRough CountryRough Country's roll-up covers: what its hard manual lists, a 3-year warranty, drain tubes, and which trucks have soft and hard titles, in each title's wording.
- BrandBAK RevolverBAK Revolver X4s by truck: RealTruck lists a 400 lbs load, a 5-year warranty and a drill-free install. Titles name years and no bed, so get yours confirmed first.
- How-toMeasure your bedMeasure your truck bed in one minute: from the front wall to the closed tailgate, along the floor. Then compare inches with the title, because bed names differ.
- Buying guideHard roll-upHard roll-up tonneau covers use aluminum slats that still roll to the cab. What the manuals ask, the load figures RealTruck prints, and which trucks are listed.
Who is behind this
rolluptonneaucover.com Editorial Team
Truck fit and buying advice
We are the editorial team at rolluptonneaucover.com. We read listing titles, maker install sheets and truck makers' own bed specifications and sort them truck by truck, with sources on every page. Nobody here has bolted these covers to a truck, and nothing was measured in a lab. We say so plainly.
- Listing titles and maker sheets read
- Sources on every page
- No installs and no lab work
- Publisher details in the imprint