Truck fit
Tundra Tonneau Cover: Roll-Up Options by Year and Bed
Tundra covers split at 2014 and at 2022, then by a 5.5 ft or 6.5 ft bed, with few choices at 8 ft. The new body is the catch: we could not read a maker sheet for the 2022-2026 Tyger covers, so those are start points, not picks.
Disclosure: This page contains affiliate links (marked with *). If you buy through them, we earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
The short version
For a 2014-2021 or 2007-2013 Tundra, Tyger T1 covers titled by bed come with a sheet we could read. For 2022-2026, Tyger titles 5.5 ft (67 in) and 6.5 ft (79 in), but the sheet was unavailable, so treat them as listing data only. For a long bed, the listed choices thin out fast.
What's on this page
Pick your years
- 2022 to 20262022-2026 Tundra coversTyger and MaxMate by bed, BAK without a named bed.
- 2014 to 20212014-2021 Tundra coversTyger pick for each bed, with sheets read.
- 2007 to 20132007-2013 Tundra coversTyger pick for each bed, plus an 8 ft listing.
Bed and cab
Toyota's 2025 brochure lists a Double Cab with a 6.5 ft standard or 8.1 ft long bed, and a CrewMax with a 5.5 ft short or 6.5 ft standard bed. It gives inside lengths of 77.6, 96.5 and 65.6 inches. The bed is listed at 58.7 inches wide and 20.9 inches deep, with 48.7 inches between the wheelwells. Toyota also describes an aluminum-reinforced composite bed.
The 2026 brochure carries a caption that reads "CrewMax with 6.5-ft. Long Bed", while also using "8.1-ft Long Bed" in its list. So "long bed" can mean two lengths in one document. Go by the number, not the word.
Which names point at which bed
Titles split the Tundra's short bed in three ways. Tyger on 2014-2021 says Fleetside 5.5 ft (66 in). Tyger on 2022-2026 says 5.5 ft (67 in). Gator on 2007-2021 says 5 ft 7 in. If you are comparing, measure your bed and read the inches in the title.
On the 6.5 ft bed, Tyger's titles say 78 in on 2014-2021 and 79 in on 2022-2026. On 8 ft, we found one soft cover titled "2007-2021 Toyota Tundra 8ft Bed" from R5, listing data only. We found none titled for the 8.1 ft bed on a 2022-2026 truck in the data we pulled.
Rails
Rails are a question to answer before you buy, not during the install.
Toyota lists a deck rail system with four cleats on most Tundra grades. Tyger's sheets say Toyota trucks with a factory utility track rail get separate clamp instructions attached. If your truck has rails, look for that sheet in the box before you tighten anything.
Starting points
| Comparison | Our pick: 2014-2021, 5.5 ftTyger T1 (2014-2021 Tundra, 5.5 ft) | Our pick: 2014-2021, 6.5 ftTyger T1 (2014-2021 Tundra, 6.5 ft) | Our pick: 2007-2013, 5.5 ftTyger T1 (2007-2013 Tundra, 5.5 ft) | Start here: 2022-2026, 5.5 ftListing data onlyTyger T1 (2022-2026 Tundra, 5.5 ft) |
|---|---|---|---|---|
| Stated fit | 2014-2021 Toyota Tundra | Fleetside 5.5' Bed (66") | TG-BC1T9041 | 2014-2021 Toyota Tundra | Fleetside 6.5' Bed (78") | TG-BC1T9042 | 2007-2013 Toyota Tundra | Fleetside 5.5' Bed (66") | TG-BC1T9038 | 2022-2026 Toyota Tundra | 5.5' (67") Bed | TG-BC1T9062 |
| Style | Soft roll-up | Soft roll-up | Soft roll-up | Soft roll-up |
| Material | Soft vinyl | Soft vinyl | Soft vinyl | Not stated in the title |
| Install | Clamp-on, per maker sheet | Clamp-on, per maker sheet | Clamp-on, per maker sheet | Not read for this part |
| Warranty | – | – | – | – |
| Price class | Mid-range | Mid-range | Mid-range | Mid-range |
| Best for | Owners who want a soft cover with a maker sheet they can read before ordering. | Owners who want a soft cover with a maker sheet they can read before ordering. | Owners who want a soft cover with a maker sheet they can read before ordering. | Owners of the exact truck and bed named in the title. |
| MSRP | – | – | – | – |
| On Amazon(paid link to Amazon, opens in a new tab)Ad · paid link · check price & delivery on Amazon | On Amazon(paid link to Amazon, opens in a new tab)Ad · paid link · check price & delivery on Amazon | On Amazon(paid link to Amazon, opens in a new tab)Ad · paid link · check price & delivery on Amazon | On Amazon(paid link to Amazon, opens in a new tab)Ad · paid link · check price & delivery on Amazon |
Tyger T1 (2014-2021 Tundra, 5.5 ft)
Soft roll-up cover whose listing title reads: 2014-2021 Toyota Tundra | Fleetside 5.5' Bed (66") | TG-BC1T9041.
Fits, according to the listing (maker's sheet read)
2014-2021 Toyota Tundra | Fleetside 5.5' Bed (66") | TG-BC1T9041 (read November 3, 2026)
Check your exact year and bed length on the listing before you buy.
Why here: Title names years, bed and part number, and the maker's sheet is readable. Buy it if you have the CrewMax short bed on that body. Skip it if yours is a 2022 or newer.
Why buy it
- The part number in the title ties the listing to Tyger's own sheet
- That sheet uses clamps, a ratchet with a 10mm socket and a Phillips screwdriver, with no drilling step
- The sheet covers crossbars, the latch gap and a tension plate for adjusting the fit
Why skip it
- Over-the-rail bed liner: the sheet says small 2 x 4 inch holes must be cut in the liner
- Vinyl cover; no weight rating appears on the sheet
- Style
- Soft roll-up
- Material
- Soft vinyl
- Install
- Clamp-on, per maker sheet
- Price class
- Mid-range
A hard option for the new body sits on the 2022-2026 page. For slats in general, see hard roll-ups.
Have the bed in inches ready before you shop, and the rest of this page will be quick. The year pages below list every title we read.
Then pick your block above.
What owners ask
What bed lengths does the Tundra have?
Toyota's 2025 brochure lists Double Cab with a 6.5 ft standard bed or an 8.1 ft long bed, and CrewMax with a 5.5 ft short bed or 6.5 ft standard bed. It gives inside lengths of 77.6, 96.5 and 65.6 inches.
Does a 2021 Tundra cover fit a 2022?
The Tyger titles we read do not span that break. They run 2014-2021 and 2022-2026. BAK and TruXedo also sell separate listings on either side. Buy the listing that names your year.
Why do titles say 66, 67 and 5 ft 7 in for one short bed?
Sellers round differently. Tyger says 5.5 ft (66 in) on 2014-2021 and 5.5 ft (67 in) on 2022-2026, Gator says 5 ft 7 in on 2007-2021, and Toyota's 2025 brochure gives 65.6 inches. Measure your own bed and check the title.
Does the Tundra bed need a special cover?
Toyota's brochure lists a deck rail system with four cleats on most grades and a composite bed. Tyger's sheets say Toyota trucks with a factory utility track rail get separate clamp instructions, so check for that sheet.
Sources
Where to next
- Truck fit2022-2026Roll-up covers listed for the 2022-2026 Tundra: Tyger and MaxMate at 5.5 ft and 6.5 ft, BAK with no bed named. No maker sheet was readable, and this page says so.
- Truck fit2014-2021Roll-up covers listed for the 2014-2021 Tundra: Tyger T1 at Fleetside 5.5 ft and 6.5 ft with readable sheets, plus Gator, TruXedo and BAK. Stated fit.
- Truck fit2007-2013Roll-up covers listed for the 2007-2013 Tundra: Tyger T1 for 5.5 ft and 6.5 ft with readable sheets, and an 8 ft listing from R5. Stated fit.
- How-toMeasure your bedMeasure your truck bed in one minute: from the front wall to the closed tailgate, along the floor. Then compare inches with the title, because bed names differ.
- How-toInstall a roll-up coverHow a soft roll-up tonneau cover goes on, from the Tyger and Gator sheets: tools, rail placement, clamps, crossbars, tension, and the checks most people skip.
Who is behind this
rolluptonneaucover.com Editorial Team
Truck fit and buying advice
We are the editorial team at rolluptonneaucover.com. We read listing titles, maker install sheets and truck makers' own bed specifications and sort them truck by truck, with sources on every page. Nobody here has bolted these covers to a truck, and nothing was measured in a lab. We say so plainly.
- Listing titles and maker sheets read
- Sources on every page
- No installs and no lab work
- Publisher details in the imprint