Truck fit
2014-2021 Tundra Roll-Up Tonneau Covers by Bed
This is the Tundra block to shop if you want a sheet in hand first. Tyger's T1 titles name Fleetside 5.5 ft (66 in) and 6.5 ft (78 in), each with a sheet we could read. Gator's title runs 2007-2021 at 5 ft 7 in. Nothing on this page spans into 2022.
Disclosure: This page contains affiliate links (marked with *). If you buy through them, we earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
The short version
On a 2014-2021 Tundra, buy the Tyger T1 for your bed: Fleetside 5.5 ft (66 in), part TG-BC1T9041, or Fleetside 6.5 ft (78 in), part TG-BC1T9042. The sheets have no drilling step. Toyota-with-track-rail trucks get separate clamp instructions. For a hard cover, BAK's Revolver X4s title runs 2007-2021 and names no bed.
Tyger T1 (2014-2021 Tundra, 5.5 ft)
Soft roll-up cover whose listing title reads: 2014-2021 Toyota Tundra | Fleetside 5.5' Bed (66") | TG-BC1T9041.
Fits, according to the listing (maker's sheet read)
2014-2021 Toyota Tundra | Fleetside 5.5' Bed (66") | TG-BC1T9041 (read November 3, 2026)
Check your exact year and bed length on the listing before you buy.
Why here: Title names years, Fleetside bed, inches and part number, and that sheet is readable. Buy it if you have the short bed. Skip it if you have the 6.5 ft bed.
Why buy it
- The part number in the title ties the listing to Tyger's own sheet
- That sheet uses clamps, a ratchet with a 10mm socket and a Phillips screwdriver, with no drilling step
- The sheet covers crossbars, the latch gap and a tension plate for adjusting the fit
Why skip it
- Over-the-rail bed liner: the sheet says small 2 x 4 inch holes must be cut in the liner
- Vinyl cover; no weight rating appears on the sheet
- Style
- Soft roll-up
- Material
- Soft vinyl
- Install
- Clamp-on, per maker sheet
- Price class
- Mid-range
Tyger T1 (2014-2021 Tundra, 6.5 ft)
Soft roll-up cover whose listing title reads: 2014-2021 Toyota Tundra | Fleetside 6.5' Bed (78") | TG-BC1T9042.
Fits, according to the listing (maker's sheet read)
2014-2021 Toyota Tundra | Fleetside 6.5' Bed (78") | TG-BC1T9042 (read November 3, 2026)
Check your exact year and bed length on the listing before you buy.
Why here: The same for the standard bed. Skip it if you have the 8 ft bed.
Why buy it
- The part number in the title ties the listing to Tyger's own sheet
- That sheet uses clamps, a ratchet with a 10mm socket and a Phillips screwdriver, with no drilling step
- The sheet covers crossbars, the latch gap and a tension plate for adjusting the fit
Why skip it
- Over-the-rail bed liner: the sheet says small 2 x 4 inch holes must be cut in the liner
- Vinyl cover; no weight rating appears on the sheet
- Style
- Soft roll-up
- Material
- Soft vinyl
- Install
- Clamp-on, per maker sheet
- Price class
- Mid-range
| Cover | Stated fit | Source | Listing |
|---|---|---|---|
| Tyger T1 (2014-2021 Tundra, 5.5 ft) Soft roll-up | 2014-2021 Toyota Tundra | Fleetside 5.5' Bed (66") | TG-BC1T9041 | Listing title; maker's sheet read November 3, 2026 | On Amazon* |
| Tyger T1 (2014-2021 Tundra, 6.5 ft) Soft roll-up | 2014-2021 Toyota Tundra | Fleetside 6.5' Bed (78") | TG-BC1T9042 | Listing title; maker's sheet read November 3, 2026 | On Amazon* |
| Gator roll-up (2007-2021 Tundra, 5'7") Soft roll-up | 2007-2021 Toyota Tundra 5' 7" Bed | Listing title; maker's sheet read November 3, 2026 | On Amazon* |
| TruXedo TruXport (2014-2021 Tundra) Soft roll-up | 2014-2021 Toyota Tundra (no bed length in the title) | Listing title only November 3, 2026 | On Amazon* |
| BAK Revolver X4s (2007-2021 Tundra) Hard rolling | 2007-2021 Toyota Tundra (no bed length in the title) | Listing title only November 3, 2026 | On Amazon* |
| TruXedo Lo Pro (2007-2021 Tundra) Soft roll-up | 2007-2021 Toyota Tundra (no bed length in the title) | Listing title only November 3, 2026 | On Amazon* |
Wording as the listing states it. Check your exact year and bed length on the listing before you buy. * Paid link.
What Fleetside means here
Tyger's titles add "Fleetside" on these years. It means the usual straight-sided bed. On Tundras, as with most full-size trucks, that is what nearly all owners have. If yours has a stepside bed or a bed swapped from another truck, ask before you buy.
The sheet in practice
Tyger's sheets for these two parts give you what most listings leave out:
- Tools. Ratchet wrench, 10 mm socket, Phillips screwdriver.
- Rails. Cover on the front rail, side rail into the bulkhead channel, inside edge of the side rail lined up with the inner edge of the bed rail.
- Clamps. Evenly spaced, about 6 to 8 inches from the ends. Do not tighten until everything is positioned.
- Over-the-rail liner. Small 2 x 4 in holes cut for the clamps.
- Toyota and Nissan track rail. Separate clamp instructions, attached.
- Crossbars. Arched upward, or water pools.
- Latch. Keep the clip gap under 1/16 in. Latch down before you close the tailgate.
See how to install for the whole run.
The other names
Gator. The title spans 2007-2021 at 5 ft 7 in. Tyger splits that same run in two at 2014. We cannot tell you which is right, but Gator's own sheet gives you its care and safety rules, and it is a general sheet rather than one for this truck.
TruXedo TruXport. Title runs 2014-2021 and names no bed. Have the seller confirm.
TruXedo Lo Pro. Title runs 2007-2021 and names no bed. Same advice.
BAK Revolver X4s. A hard roll-up, title 2007-2021, with no bed named. RealTruck lists a drill-free install and a 5-year warranty.
Across the 2022 line
Tyger's new-body titles run 2022-2026. BAK's run 2022-2027. None of the titles on this page says 2022, so a 2022 truck belongs on the 2022-2026 page instead.
Before you order
- Check that your truck and bed are in the title.
- Measure your bed, using our guide.
- Look at your rails for the clamp instructions.
- Think about tall cargo. Gator's sheet says fully rolled and strapped, never partly open. See driving with the cover open.
If a cover sits short once it is on, the T1 sheet says to move the whole assembly toward the tailgate.
What owners ask
Does this fit the 8 ft bed?
The Tyger titles do not name it. R5's title says 2007-2021 Toyota Tundra 8ft Bed, and it is on the 2007-2013 page, listing data only. Ask the seller to confirm.
What changes with the factory track rail?
Tyger's sheet says Nissan and Toyota trucks with a factory utility track rail get separate clamp instructions, attached to the sheet. Check that they are in your box before you begin.
Is a Gator 5 ft 7 in the same bed as a Tyger 5.5 ft?
They both point at the short bed. Tyger says 66 in. Gator's title gives no inches here. Toyota's newer brochure gives 65.6 in for the 5.5 ft bed. Measure if you want to compare numbers.
Sources
Where to next
- Truck fitTundraTundra roll-up tonneau covers by year block and bed, with Toyota's own bed lengths, deck rail notes and the wording each title or maker sheet states.
- Truck fit2022-2026Roll-up covers listed for the 2022-2026 Tundra: Tyger and MaxMate at 5.5 ft and 6.5 ft, BAK with no bed named. No maker sheet was readable, and this page says so.
- Truck fit2007-2013Roll-up covers listed for the 2007-2013 Tundra: Tyger T1 for 5.5 ft and 6.5 ft with readable sheets, and an 8 ft listing from R5. Stated fit.
- How-toInstall a roll-up coverHow a soft roll-up tonneau cover goes on, from the Tyger and Gator sheets: tools, rail placement, clamps, crossbars, tension, and the checks most people skip.
- BrandTygerWhat Tyger Auto's T1 and T2 soft roll-up covers state: titles by year, bed and part number, sheets we could read, sheets we could not, and where to go per truck.
Who is behind this
rolluptonneaucover.com Editorial Team
Truck fit and buying advice
We are the editorial team at rolluptonneaucover.com. We read listing titles, maker install sheets and truck makers' own bed specifications and sort them truck by truck, with sources on every page. Nobody here has bolted these covers to a truck, and nothing was measured in a lab. We say so plainly.
- Listing titles and maker sheets read
- Sources on every page
- No installs and no lab work
- Publisher details in the imprint